i100 Large Character Inkjet Printer
The i100 large character ink jet printer is an entry-level ink jet printer for coding time, date, shelf-life, batch and traceability information on most production lines.
![](https://codeology.com/wp-content/uploads/2024/04/i100-for-web.jpg)
![](https://codeology.com/wp-content/uploads/2024/04/arabic-print.jpg)
Stop Press. All Codeology inkjets are now available with Arabic fonts.
The i100 can print one or two lines of print in any combination of one line only, two lines on one side of your product, or two single lines one on each side of your product. Needing no air supply (it needs only mains electricity) the i100 can be installed in minutes. An internal low-pressure air pump supplies all the necessary air which removes safety issues associated with fluid containers pressurised from mains air and means it is impossible to burst ink containers by over-pressuring them. Single line Outer case ink jet exampleor twin-line low-profile print heads allow the heads to access the products even when mounted inside case tapers or machinery.
![](https://codeology.com/wp-content/uploads/2024/03/twin-sample.jpg)
Our smallest print head is less than 25mm high yet can still print a 20mm high character.
Operating stand-alone, the printer can be controlled from a keypad or remotely via RS232 or Ethernet from a PC using iText software. IText software also allows factory automation systems to access the print count and production information. The keypad can be either remote and removable for security of operation, or incorporated into one of the print head covers for ease of use. If used remotely, one keypad can be shared amongst all of your printers. When built into the print head cover, one keypad can control print on both sides of your product
![](https://codeology.com/wp-content/uploads/2024/03/100_clip_image002_0000.jpg)
![](https://codeology.com/wp-content/uploads/2024/03/100_clip_image002.jpg)